Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: tubenit on June 26, 2016, 05:44:36 pm
-
Paralleled V1 (5751) and a 5879 OD (2nd gain stage of OD) & active FX. (I converted one of my amps into this experiment)
Lots of sustain. Not much floor noise. Very transparent tone with sort of a vowel accent. I have played it enough now to be past the initial honeymoon stage and still like the tone of the amp very much. It has a very full warm tone to it.
It's very touch sensitive with the picking. It goes from a clean smooth tone to having a tiny bit of grit/distortion by just changing the picking. The sustain with the light picking is equal to or better then the more aggressive picking to my ears. I may try adding another smoothing cap somewhere?
Still a work in progress, but I thought I'd show where it is at this stage. The SCH schematic has the B+ rail on it on the 2nd page of the file.
With respect, Tubenit
-
Another idea ..................
Sort of a 3 channel D-style inspired.
DRAFT design. I have not built this (yet).
With respect, Tubenit
-
This looks to be a very interesting amp !! How many whats this one can do ?
-
Around 23 watts.
-
I was curious if relays are necessary for switching between od/clean, or is a simple footswitch feasible.
-
You would need a relay switch to have it be footswitchable while playing.
With respect, Tubenit
-
Thanks.
-
I find all this VERY hard to believe. I reside in the "Sho-Me" state so unless I hear a clip? :dontknow:
Jim :icon_biggrin: