Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: labb on July 24, 2016, 09:30:14 am

Title: Fuse holder wiring
Post by: labb on July 24, 2016, 09:30:14 am

Simple question. What is the correct way to connect a panel mount fuse holder...There is usually a terminal on the side and one on the bottom...Which terminal do you connect the lead from the switch to.

Title: Re: Fuse holder wiring
Post by: vibrolax on July 24, 2016, 09:44:10 am

Line (hot) is wired to the end terminal.  Switch (load) is wired to the side terminal.