Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => AmpTools/Tech Tips => Topic started by: kagliostro on January 05, 2017, 08:52:02 am

Title: Visio use question
Post by: kagliostro on January 05, 2017, 08:52:02 am

I've a 2007 version of Visio and I would like to know if, when using measure tools, is possible to set the tool to a specified measure using the keyboard instead of to drag one of the points

This because building a new component or some part that I require, it will be easier to set it at the right measure

Thanks

Franco

attached a .vsd file with the tools I mean

Title: Re: Visio use question
Post by: sluckey on January 05, 2017, 09:28:25 am

Read this. Applies to Visio 2010 also...

https://support.office.com/en-us/article/Specify-dimensions-by-using-the-Size-Position-window-546fd424-7685-47da-bf9c-e199b8fdca53

Title: Re: Visio use question
Post by: kagliostro on January 05, 2017, 09:48:29 am

Thanks Steve

Useful link :thumbsup:

Franco