Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => AmpTools/Tech Tips => Topic started by: kagliostro on March 28, 2017, 02:07:54 am

Title: A suggestion for Doug about material to have on stoch
Post by: kagliostro on March 28, 2017, 02:07:54 am

Ciao Doug

Can I suggest you, as in the past I do for the treaded rivets, one other similar item to solve other chassis "problems" ?

this is my proposal, clinching nuts

(http://i.imgur.com/gV3Tkmn.jpg)

this is a chassis that purcased one our friend at www.guitargear.net.au (http://www.guitargear.net.au)
(http://i.imgur.com/0bSVrYO.jpg)

they aren't difficult to install

oficially you can do it with a small pneumatic press or mehanic press but it can be done also the way you mount treaded rivets

(may be also only with an hammer if you pay attention and don't damage the nut)

(http://i.imgur.com/jHGpI79.jpg)

Franco