Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: super&plexi on April 03, 2017, 01:39:06 pm

Title: NFB unhook UL Fender
Post by: super&plexi on April 03, 2017, 01:39:06 pm

Where does one go to disconnect NFB on 70watt PR? Sounds great, very compressed...want to hear without. Only "mod" I see is wire from pull out to reverb (1/2 of switch) has been removed. Is it 820 R 1watt? Thanks!

Title: Re: NFB unhook UL Fender
Post by: sluckey on April 03, 2017, 02:01:52 pm

I would just disconnect from the speaker jack. This will also kill your line out jack, but it's just a test.