Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Misc Schematics and Layouts => Topic started by: ernest on April 05, 2017, 08:04:51 am
-
I'm going to be picking up this amp later today I found on craigslist. It's a Danelectro model 299 series E Twin Twelve. I've only been able to find a couple photos of this amp online and no schematic. Would anyone know if this is the same as the model 300 or the same a the Silvertone 1484 twin twelve?
-
Images pulled off the web.
(http://www.elarrick.com/danelectro/Danelectro1.jpg)
(http://www.elarrick.com/danelectro/Danelectro2.jpg)
(http://www.elarrick.com/danelectro/Danelectro3.jpg)
-
I am wondering if the Twin 15 is the same amp?
http://el34world.com/charts/Schematics/files/danelectro/danelectro_twin15_1961.pdf (http://el34world.com/charts/Schematics/files/danelectro/danelectro_twin15_1961.pdf)
With respect, Tubenit
-
I am wondering if the Twin 15 is the same amp?
http://el34world.com/charts/Schematics/files/danelectro/danelectro_twin15_1961.pdf (http://el34world.com/charts/Schematics/files/danelectro/danelectro_twin15_1961.pdf)
With respect, Tubenit
I looked at this yesterday and wondered the same...I guess I'll find out later today when I pick it up. I'm not even sure exactly what tubes are in it. thanks!
-
The DanElectros and Silvertones had a lot of similarity from model to model. Maybe it's the same or similar enough for that schematic to be useful?
When you get the amp, please post a good photo of the control panel and list the tubes that it has in it. That will go along way in figuring out what schematic may be close.
With respect, Tubenit
-
two 6L6, 6CG7, 12ax7 one on top and one on bottom, 6au6, and a 5y3 rectifier
(http://www.elarrick.com/danelectro/Danelectro4.jpg)
-
I think that Twin 15 schematic will prove to be reasonably accurate.
with respect, Tubenit
-
please see attached - looks similar both the upper and lower chassis. . mine was a 15" and had two jacks for slave amps - it was called the "panoramic". it looks like yours uses the 6FQ7 for the PI, the model 89 i had used a 6SN7 for the PI - same tube different package. the schematics provided were reverse engineered by me. sold it to a blues nut for less than i paid for it...shame on me.
seems that photophuckit deleted all my pics i had of it. haven't been there in a couple of years, so no wondering why...
--pete