Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: davidwpack on September 24, 2017, 02:34:10 pm

Title: schematic translation/interpretation
Post by: davidwpack on September 24, 2017, 02:34:10 pm
A band mate had a Dr. Z Route 66 amp that I was thoroughly impressed with. It was a simple little amp with a huge sound and thus begun my infatuation with the KT66 tube. He has since gotten rid of it so I found a schematic on the internet and Hoffmanized a layout for it. I'll try to .post it here. This should be less erroneous than my first draft nevertheless one might compare to a schematic. Anyway, I thought someone may be looking for a relatively simple build. I changed one of the caps in the power supply. The two 22uf caps should be a single 47uf. That's the only deviation I made. Anyways...Dave
Title: Re: schematic translation/interpretation
Post by: tubeswell on September 24, 2017, 03:00:49 pm
Cool. Gutshot of Mike's layout for comparison FWIW.

Title: Re: schematic translation/interpretation
Post by: davidwpack on September 24, 2017, 04:11:33 pm
Awesome! Thanks!