Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: dennyg on October 29, 2017, 12:09:58 am
-
Seems simple enough but want to make sure I do this right. I have 3-way secondary switch (4/8/16) and want to wire up parallel jacks in case I ever want to stack 2 16ohm cabs (set the switch on 8ohms). Thinking I connect the tips together and the grounds together - then strap a 270R safety resistor between tip and ground of one of the jacks. Is this correct or other considerations, or point me to a schematic?