Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: turtle441 on November 27, 2017, 08:18:33 pm

Title: Plexi SE PCB's
Post by: turtle441 on November 27, 2017, 08:18:33 pm

I just picked up an Epiphone Valve Junior for a song.  Was looking to gut it and build something new.  I went over to guitaramplifierpcbs.com and it looks like they may be out of business.  Did I miss this? 

Not the end of the world, I can always make a turret board, but I was looking forward to taking the easy way out.

Title: Re: Plexi SE PCB's
Post by: Mason on November 28, 2017, 07:40:24 am

They have a new website. Check out http://gapcb.com.

Title: Re: Plexi SE PCB's
Post by: pompeiisneaks on November 28, 2017, 09:11:43 am

Doug has a turretboard building tool right here and it's super easy and works a charm.  No need to go elsewhere:

http://el34world.com/Forum/index.php?topic=22070.0

His service is super fast too, usually I get it within 2-3 days from his NC shop to the PNW.

~Phil

Title: Re: Plexi SE PCB's
Post by: turtle441 on November 28, 2017, 11:12:04 am

Mason,
Thanks, that's what I was looking for.  Google hasn't found that new website yet.

pompeiisneaks,
Yeah, I'm tracking.  If I went the turret board route, I'd just drill and stake them myself.  That doesn't take very long.  It's converting the schematic to a layout that I was hoping to avoid on this project.  (Let's hear it for instant gratification...) :icon_biggrin:

Title: Re: Plexi SE PCB's
Post by: pompeiisneaks on November 28, 2017, 11:53:49 am

Oh gotcha a pre-made one that's ready to go.  Makes sense.

~Phil