Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => PC Express and JSchem - Schematics and Layout diagrams => Topic started by: tubenit on March 24, 2018, 11:39:24 am

Title: Making and saving custom components
Post by: tubenit on March 24, 2018, 11:39:24 am

In response  to a post on Tweaks,  I explained how one can group an entire section and save it as a custom component.  For example one can save:
active FX loop,  one tube reverb, 6G16 vibrato,  Fender or Marshall or Dumble or James tone stacks,  LTPI's,   PT & rectifier and B+ rail,  VVR,  entire preamp sections,   etc...

All those and more are in the files attached to this post.  Just click over an entire area and label it and save it in your own custom library.

With respect,  Tubenit