Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Misc Schematics and Layouts => Topic started by: RicharD on May 26, 2018, 11:48:20 am
-
I'm pretty certain that there aren't any tube heads using Upverter because I couldn't find even a 12AX7 that had a usable symbol, much less a footprint. I've been using Upverter at work for a couple of years, mostly designing stuff around microcontrollers etc. So in my spare time, I started creating parts I can use. I made this project public which is a collection of tubes with the Belton PCB socket, 1/4W resistors and 600V orange drops (so far). This is supposed to be visable to anyone via the url so here it is. Please let me know if you can see this. If by chance you are an Upverter user, can you get to my parts?
https://tools.upverter.com/eda/#tool=schematic,designId=f04c752f4398e68a