Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: labb on September 03, 2018, 08:45:09 am
-
The Plexi 6V6 has a normal channel and a bright channel with volume control for each. Only one input. How do you switch from one channel to the other? Zero out the volume of one? What happens if both volumes are turned up?
-
Add a on/off/both switch is what I'd do.
-
The Plexi 6V6 has a normal channel and a bright channel with volume control for each. Only one input. How do you switch from one channel to the other? Zero out the volume of one? What happens if both volumes are turned up?
The normal channel sounds muddy. The bright channel sounds shrill. But both channels together sound very musical. You can use a C&K 7211 ON-ON-ON (or similar) switch to select normal, bright, or both. I predict after flipping it a few times you will end up leaving it in the both position. I can't imagine a situation where you would only want one channel, but if so, rather than flip a switch, just turn one volume knob to zero.
-
Yeah, that's what I meant. Ch1/ch2/both.