Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: capmando on October 14, 2018, 10:52:24 am

Title: replacing a Vtl 5c4/2 for a Vtl5c3/2
Post by: capmando on October 14, 2018, 10:52:24 am

Anyone have experience with replacing a Vtl 5c4/2 for a Vtl5c3/2, any modifications needed?
Having an issue with a Fender super 60 channel switching, input goes dead after switching over to either
Channel. Pluging a jack from line out to Amp in seems to help sometimes.

Any thoughts would be appreiated.
I hope everyone is dry after the storms and did'nt lose to much, whew!
Capmando

Title: Re: replacing a Vtl 5c4/2 for a Vtl5c3/2
Post by: PRR on October 14, 2018, 10:52:55 pm

I don't know. In a switching scheme, probably either will work.

Title: Re: replacing a Vtl 5c4/2 for a Vtl5c3/2
Post by: capmando on October 28, 2018, 12:03:43 am

Much obliged for the reply.