Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: EL34 on November 14, 2018, 12:34:29 pm

Title: Custom boards made using DIYLC
Post by: EL34 on November 14, 2018, 12:34:29 pm

There are 3 steps to having a custom board made using DIYLC

1) Create the board in DIYLC
   See the video post for more info on how to do that
   https://el34world.com/Forum/index.php?topic=23814.0 (https://el34world.com/Forum/index.php?topic=23814.0)


2) Analyze the board and add it to your shopping cart using my on line program here
    https://hoffmanamps.com/php/DIYLC/DiyFileAnalyzer.php (https://hoffmanamps.com/php/DIYLC/DiyFileAnalyzer.php)
    See the video post here for more info on that
   https://el34world.com/Forum/index.php?topic=23814.0 (https://el34world.com/Forum/index.php?topic=23814.0)


3) I make the board and send it to you :)

Here's some screen shots showing a .diy board I made for a customer

---

Title: Re: Custom board being made
Post by: EL34 on November 14, 2018, 12:36:07 pm

Continued from post above
Pictures of the custom board above being made

---

Title: Re: Custom boards made using DIYLC
Post by: EL34 on December 13, 2018, 09:24:02 am

Here's an example of a customer that combined 3 boards in DIYLC
Then they used two cut lines to indicate where the 3 boards get separated

You can see the Analyzer program image of the board on the papers in the images below

One image shows the drilled board after it came off the CNC machine and the 3 boards had not been separated yet

The other image shows the boards after they had been separated and the turret lugs were installed