Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: ginger on December 09, 2018, 10:57:42 am

Title: Silvertone 1485
Post by: ginger on December 09, 2018, 10:57:42 am

I need to replace the screen resistors on the output tubes . The stock value is 68 ohms , which I never stock... any problem with using 100 ohms ?

Title: Re: Silvertone 1485
Post by: sluckey on December 09, 2018, 11:26:08 am

no problem

Title: Re: Silvertone 1485
Post by: ginger on December 09, 2018, 11:37:22 am

Ok , thanks

Title: Re: Silvertone 1485
Post by: PRR on December 09, 2018, 03:16:01 pm

Silvertone would have done that, if they ran out of 68s.

Title: Re: Silvertone 1485
Post by: sluckey on December 09, 2018, 03:59:36 pm

Quote from: PRR on December 09, 2018, 03:16:01 pm

Silvertone would have done that, if they ran out of 68s.

Gibson too. But Gibson would not tell anyone!  :l2:

Title: Re: Silvertone 1485
Post by: shooter on December 09, 2018, 04:48:32 pm

Quote

Gibson would not tell anyone!

:laugh:
Including the poor draftsman doing the schematic  :think1: