Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: kagliostro on February 02, 2019, 06:24:15 pm

Title: One tube SE with TWO OT in parallel ..... Do you think there will be problems ?
Post by: kagliostro on February 02, 2019, 06:24:15 pm

I did'nt Remember if I submitted this question previously


I have a pair of 6w SE OT and would like to know if I can use it paralleled for a 6L6 tube in SE configuration without problems


Thanks


Franco

Title: Re: One tube SE with TWO OT in parallel ..... Do you there will be problems ?
Post by: shooter on February 02, 2019, 07:07:44 pm

I've done a parallel OT primary side with secondary in series for a 2SE 6V6, keep your impedance in the ballpark for the 6L6 at whatever B+ you have and your Pdiss under 12W and you should be fine.

Title: Re: One tube SE with TWO OT in parallel ..... Do you there will be problems ?
Post by: PRR on February 02, 2019, 09:26:47 pm

Fine.

Title: Re: One tube SE with TWO OT in parallel ..... Do you th there will be problems ?
Post by: kagliostro on February 03, 2019, 05:32:09 pm

Many Thanks


Franco