Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: clayman on February 25, 2019, 08:06:14 am

Title: Pro jr. To a stout?
Post by: clayman on February 25, 2019, 08:06:14 am

Ideas for a pro jr?? Thinking of using iron and chassis for a stout. Any other Ideas? Want to use terminal strips, p to p.  Want a blue's amp

Title: Re: Pro jr. To a stout?
Post by: sluckey on February 25, 2019, 08:23:56 am

That is doable. Have you seen Hoffman's Pro Jr. conversion?

Title: Re: Pro jr. To a stout?
Post by: clayman on February 25, 2019, 09:03:08 am

Yes I have seen the conversion, I don't like the original circuit. Thinking plexi or 5879 don't need tremelo, reverb etc.  The pab that tubenit uses looks good.

Title: Re: Pro jr. To a stout?
Post by: sluckey on February 25, 2019, 09:15:32 am

Look at my Dual Lite, or AC-15, or Lightning, or November. The Dual Lite is an AC-15 normal channel (EF86) plus Marshall 18W Lite (basically Stout) in one chassis. That would be my pick of my EL84 amps. You get Vox and Marshall tones in one small box.

     http://sluckeyamps.com/index.htm

Title: Re: Pro jr. To a stout?
Post by: vampwizzard on February 25, 2019, 10:18:41 am

Sluckey: Did you use a blank chassis for the dual lite?

Title: Re: Pro jr. To a stout?
Post by: sluckey on February 25, 2019, 10:35:07 am

Yes. I use blanks for all my stuff.