Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Colas LeGrippa on April 21, 2019, 11:20:05 am
-
To celebrate today with my friends, I had thought to buy egg shaped tubes unsuccessfully. Bfore, I tried to put a 100w head in a chocolate casing but it all melted. Good news: pure chocolate is non conductive !
I will get me a chocolate teddy bear or rabbit and we'll play songs together for Easter, in Eastern time.
My neighbours smoke pot since it s legalization in october and the fumes get under the walls and through the holes in the gyproc. My apt gets fumed to the point I had to replace all the light bulbs by fog lights ! Ufff what a pain celebrating Easter like a smoked meat !
Tube amp stuff here. Almost found an egg shaped tube: KT-66 . BUT I prefer chocolate.
Happy easter! :icon_biggrin:
-
:l2:
I have the opposite problem, it escapes under the door and outside, then I have to chase it down :icon_biggrin:
to get an egg shaped tube you must regulate the red plating so as to have the glass melt at a controlled rate, the top will sag down, the middle out, walla
Happy Easter
-
yu's crazy :laugh:
-
KT150 - the easter toobz.
(https://cdn11.bigcommerce.com/s-dfccaj35/images/stencil/500x659/products/43672/44970/NP090-1__60888.1515879501.JPG?c=2)
happy easter y'all!
--pete
-
I'm in LOVE!!! looks as good as Chihuly glass!
1st test ya gotta take to be geek n artist, sanity, pass, find a different career :icon_biggrin:
-
Kt 150 !!!!!!!
Yeahhhhhhhhhhhh.......
Another loint Jack ?
No thanks .