Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Oddvar on May 17, 2019, 05:33:05 am

Title: Wire gauge and some more
Post by: Oddvar on May 17, 2019, 05:33:05 am

Hi.  I am a bit uncertain as to what gauge to use connecting the tubes.  I have used the 22g, bought from Hoffman, but I am a bit uncertain if that is ok?

I also wonder if the 50v tap is going onto the board as circled here in the pick?

Title: Re: Wire gauge and some more
Post by: sluckey on May 17, 2019, 05:44:49 am

22AWG is fine for most of the tube wiring. I like 20AWG for filaments.

Yes, the 50v bias tap goes in your blue circle.