Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 18, 2005, 05:24:58 am
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Fender cap can
<< Prev Topic | Next Topic >>
Author Comment
tk74
Junior tube assistant
Posts: 2
(3/16/04 8:26 am)
Fender cap can
--------------------------------------------------------------------------------
Are the measurements that Doug lists for the small Fender cap can inside or outside dimensions?
EL34
I got your parts right here.
Posts: 2260
(3/17/04 10:24 am)
Re: Fender cap can
--------------------------------------------------------------------------------
They are Rough outside measurements.
Since the metal is only 1/64th thick (guessing), inside would be slightly smaller.
gammelnalle
Junior tube assistant
Posts: 25
(3/17/04 12:33 pm)
Re: Fender cap can
--------------------------------------------------------------------------------
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.