Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: jmccanna on May 21, 2019, 12:23:54 pm
-
Hello,
I recently was given a sort of working Conn Minuet 531 organ by an older gentleman who was down-sizing his house. It is an all-tube setup and the tone generators uses sets of tubes with transformers to sound notes on the scale. In those sets there are at least 8 12AL5 tubes.
I have begun researching what I might be able to do with these little gems. They are a dual-diode tube. I have seen references to using them in a compressor circuit and/or an octaver circuit pedal?
Any thoughts from this forum would be most welcome. I have attached the datasheet.