Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Scsoul on August 10, 2019, 11:42:49 am

Title: Ecl86
Post by: Scsoul on August 10, 2019, 11:42:49 am

 Anyone have a example schamatic or pix of a pair of ecl86 using a LTP pi using the triode in the ecl86? 

Title: Re: Ecl86
Post by: sluckey on August 10, 2019, 12:11:05 pm

Just pick your favorite Fender or Marshall schematic that uses an LTP. Change the pin numbers to match the 6GW8.

Title: Re: Ecl86
Post by: tubenit on August 10, 2019, 12:20:40 pm

You may find some useful information in this thread of a SoLow Watt amp using ECL84's ……. however, there is another builder who used  ECL86's.  Some sound clips, schematics and layouts in the thread.

https://ampgarage.com/forum/viewtopic.php?f=6&t=17599&hilit=12AX7+SoLow+Watt&start=15

With respect, Tubenit

Title: Re: Ecl86
Post by: Scsoul on August 11, 2019, 04:10:04 pm

Thanks tubenit just what I was looking for I have record player anp that is running 240v on 6v6 plates,   I figure with diodes voltages should be just right for ecl86 and then a blues jr output trany should make a nice little amp