Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: dude on September 29, 2019, 01:21:50 pm

Title: Four inputs on JTM45 vs single on Plexi 6V6
Post by: dude on September 29, 2019, 01:21:50 pm

A JTM45 with four inputs, hi/low each channel, is jumping the channels basically the same as using the single  input on a Plexi 6V6?  Both volumes on both amps can then be blended, would that capability produce the same tone? I assume on the 6V6 Plexi turning one volume down to 0, would be turning off that channel or the same as just using the JTM45’s same channel...?

Title: Re: Four inputs on JTM45 vs single on Plexi 6V6
Post by: sluckey on September 29, 2019, 01:51:23 pm

The 6V6Plexi is modeled after the JMP 1987, not the JTM45 series. Slightly different. But they all operate basically the same as far as jumping channels and blending volume controls.