Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: gheorge77 on January 15, 2020, 09:41:41 am

Title: Mounting Hoffman Board with standoffs on OT/PT Bolts/Screws
Post by: gheorge77 on January 15, 2020, 09:41:41 am

I've got a bit of a space issue inside a custom build I'm working on in terms of mounting the board inside the chassis.

Would there be any issues to be concerned about if I used the OT or PT mounting bolts with a standoff to mount the turret board? Would there be a greater risk of interference or hum?  Both OT and PT are standup transformers.

Title: Re: Mounting Hoffman Board with standoffs on OT/PT Bolts/Screws
Post by: shooter on January 15, 2020, 09:55:58 am

Quote

greater risk

  :dontknow:

I've put turret boards directly "under" big OT's, no problem. 

Title: Re: Mounting Hoffman Board with standoffs on OT/PT Bolts/Screws
Post by: gheorge77 on January 15, 2020, 09:57:39 am

I'm more concerned about a direct connection between the tranny bolt and the turret board bolt....I don't think there would be an issue but I figured I'd see if anyone had experience doing that.