Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Colas LeGrippa on February 21, 2020, 12:47:41 pm
-
Hola amigos !
I have been influenced by what I read about Garnet amplifiers and Herzog line out to the point where I modded my line out to the Herzog specs. Mine was made with a 8 ohm 50w resistor followed by a voltage divider 10:1.
I don t know why the Herzog is so trebly! In fact I just can't use it the way it is.
-
Did you install a cap from power tube plate to ground?
-
No. I just made the line out with power resistor, 1 meg pot and the limiting 150k resistor.
I didn t want to build it all......shame on me :laugh:
-
You missed your big chance to drop some pretty trebly treble right there.