Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: ListerHayes on April 23, 2020, 06:24:20 pm

Title: Fender Pro Junior
Post by: ListerHayes on April 23, 2020, 06:24:20 pm

Hey Gang.  If any of you knowledgable folks have a minute, would you mind looking this over.  I know the cathode biasing works, because I wired up my Hoffman Pro Junior Turret to test it.  It's real messy though, and I'd like to order a custom board to clean everything up.  I'm in way over my head here, but this is a blast!  I got the cathode bias specs from Terry at D-Lab via his YouTube video on how to turn a Pro Junior into a Princeton.

Thanks again for all the help...

Title: Re: Fender Pro Junior
Post by: ListerHayes on April 23, 2020, 06:27:48 pm

Here is a picture of the beast in test mode... Sloppy, but sounds amazing!

Title: Re: Fender Pro Junior
Post by: EL34 on April 24, 2020, 06:22:30 am

You would have better luck posting an image or a PDF of your .diy file in the main board here
DIYLC can make a PDF
Not everyone has DIYLC

https://el34world.com/Forum/index.php?board=13.0 (https://el34world.com/Forum/index.php?board=13.0)

Title: Re: Fender Pro Junior
Post by: ListerHayes on April 24, 2020, 11:07:48 am

Quote from: EL34 on April 24, 2020, 06:22:30 am

You would have better luck posting an image or a PDF of your .diy file in the main board here
DIYLC can make a PDF
Not everyone has DIYLC

https://el34world.com/Forum/index.php?board=13.0 (https://el34world.com/Forum/index.php?board=13.0)

Will do....

Title: Re: Fender Pro Junior
Post by: ListerHayes on April 24, 2020, 12:43:53 pm

Here is the PDF version...