Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: wsscott on May 07, 2020, 11:04:37 am

Title: Snap to Grid
Post by: wsscott on May 07, 2020, 11:04:37 am

I created a Layout using Snap to Component.  I've got all the components installed with their turrets, and have decided I want to have all the turrets centered within each of their grids, which I've sized at 0.3125".  I can't figure out how to do this.  Can someone help?

Title: Re: Snap to Grid
Post by: EL34 on May 07, 2020, 11:13:33 am

All that stuff is in my videos
That may be covered in this one?


https://el34world.com/Forum/index.php?topic=23814.msg259025#msg259025 (https://el34world.com/Forum/index.php?topic=23814.msg259025#msg259025)

Or one of the others shown in this post
https://el34world.com/Forum/index.php?topic=23814.0 (https://el34world.com/Forum/index.php?topic=23814.0)

Title: Re: Snap to Grid
Post by: wsscott on May 07, 2020, 12:25:42 pm

I had already looked at those videos and it didn't address my problem.  Snap to Grid works fine when I add a new turret, but not if I'm trying to get an existing one to snap to the grid rather than the component.  Frustrating.