Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: knebiter on May 23, 2020, 02:40:11 pm
-
Very nice way to import an image and create a building block for later use.
One thing I am struggling with is not being able to mirror or rotate the building block after it is made.
Is there some way to accomplish that or is it best to just make four at 90 degrees to each other?
-
If the building block contains an image, the image cannot be rotated
You would have to make others at different angles I guess
I can rotate other building blocks, no problem