Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: p2pAmps on July 25, 2020, 09:52:14 am

Title: p2pAmps - Bad-Dawg pics
Post by: p2pAmps on July 25, 2020, 09:52:14 am
Howdy from Nashville

This is an amp that I've been building a lot of lately.  Single channel AB763, no Tremolo, Presence control, 3 knob Reverb, 1/2 power, and multi impedance.  I tried those expensive Jensen coupling caps and I have to say they are pretty great to my ear and those who have heard them.  Anyway, I thought maybe a few of you would like to see some pics in case you are thinking of building one up.  And us usual, Doug Hoffman comes through once again with a great board for me, thanks Doug!

Cheers,
Mike
(https://images.squarespace-cdn.com/content/v1/56fbe87462cd94ff6ec9d02c/1595688677485-H8FGP4MB50SYSN1RZNZ3/ke17ZwdGBToddI8pDm48kL3VKmwKI3leYB51VJjLFB8UqsxRUqqbr1mOJYKfIPR7LoDQ9mXPOjoJoqy81S2I8N_N4V1vUb5AoIIIbLZhVYxCRW4BPu10St3TBAUQYVKcgK5SGg9Ovb1yloBBOHcruw_mYLfAhRzzgArFCB07Dw0L8n4JypuoE5Tg6Wg5Oyvs/bd1.jpeg?format=2500w)
(https://images.squarespace-cdn.com/content/v1/56fbe87462cd94ff6ec9d02c/1595688677395-D4WQ5WW9X3MX3N62R0AA/ke17ZwdGBToddI8pDm48kL3VKmwKI3leYB51VJjLFB8UqsxRUqqbr1mOJYKfIPR7LoDQ9mXPOjoJoqy81S2I8N_N4V1vUb5AoIIIbLZhVYxCRW4BPu10St3TBAUQYVKcgK5SGg9Ovb1yloBBOHcruw_mYLfAhRzzgArFCB07Dw0L8n4JypuoE5Tg6Wg5Oyvs/bd2.jpeg?format=2500w)
Title: Re: p2pAmps - Bad-Dawg pics
Post by: sluckey on July 25, 2020, 10:16:57 am
I'd love to see a schematic of that amp.
Title: Re: p2pAmps - Bad-Dawg pics
Post by: p2pAmps on July 25, 2020, 11:28:56 am
Quote from: sluckey on July 25, 2020, 10:16:57 am
I'd love to see a schematic of that amp.
Email sent
Title: Re: p2pAmps - Bad-Dawg pics
Post by: vampwizzard on July 25, 2020, 12:51:42 pm
Looks great!
Title: Re: p2pAmps - Bad-Dawg pics
Post by: 6v6Pin1 on July 26, 2020, 10:05:39 am
That is a tidy build! Nice.
Title: Re: p2pAmps - Bad-Dawg pics
Post by: dwinstonwood on July 26, 2020, 10:33:37 am
The pot wiring and ground buss is a work of art in itself.
Title: Re: p2pAmps - Bad-Dawg pics
Post by: Latole on July 26, 2020, 10:35:35 am
Congrat, you do a great job, it is avery nice building
Title: Re: p2pAmps - Bad-Dawg pics
Post by: p2pAmps on July 26, 2020, 02:12:06 pm
Thank you guys
Title: Re: p2pAmps - Bad-Dawg pics
Post by: Ziggy on July 26, 2020, 09:55:46 pm
Really nice build, super clean!
Title: Re: p2pAmps - Bad-Dawg pics
Post by: Champ_49 on July 26, 2020, 11:19:20 pm
That is a really neat build! Even got the red dyes on. Great work!
Title: Re: p2pAmps - Bad-Dawg pics
Post by: jojokeo on July 27, 2020, 05:26:53 am
Fantastic! But too bad it won't work in this condition. ;)  (wondering how many noticed there's no heater wiring yet?)
Title: Re: p2pAmps - Bad-Dawg pics
Post by: p2pAmps on July 27, 2020, 06:39:25 am
Quote from: jojokeo on July 27, 2020, 05:26:53 am
Fantastic! But too bad it won't work in this condition. ;)  (wondering how many noticed there's no heater wiring yet?)

HAHA, well, it wasn't completely done yet but it is now and sounding pretty good too. 
Title: Re: p2pAmps - Bad-Dawg pics
Post by: SILVERGUN on July 27, 2020, 07:48:03 am
Quote from: jojokeo on July 27, 2020, 05:26:53 am
Fantastic! But too bad it won't work in this condition. ;)  (wondering how many noticed there's no heater wiring yet?)
I just thought this was the LOW POWER version   :icon_biggrin:
Title: Re: p2pAmps - Bad-Dawg pics
Post by: yorgle on July 27, 2020, 10:42:41 am
Quote from: jojokeo on July 27, 2020, 05:26:53 am
Fantastic! But too bad it won't work in this condition. ;)  (wondering how many noticed there's no heater wiring yet?)

I think the tubes are heated by the sheer beauty of the build!