Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: bnwitt on August 16, 2020, 11:33:13 am
-
Hey everyone. Long time no talk. I am towards the end of a Hoffman PR build (with an added middle control and a pull bright switch) for my studio. I thought I would share the PDF file on the design if anyone is interested. This completes my Fender amp tone set for the amplifier closet. I Now have a 5E3 1x12, AB763 DR 1x12 and this PR 1x12 in the Fender set. On the Marshall side I have a JCM 2000 DSL 401 and I am thinking about adding Sluckey's Dual preamp to to an EL34 power section in a head cabinet so I have the Marshall 1987 and JCM800 tones covered. On the VOX side I am finally ordering trannies for Sluckey's AC 15 and I have a Bad Cat Cougar 15 that I am considering gutting/modifying to be a bit more VOX or Matchless like but haven't started delving into that yet since it will come after the AC 15. I hope you all are having amp fun during this crazy lock down.
Barry