Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: ululufut on September 24, 2020, 07:41:38 pm
-
I'm building a circuit into a Deluxe Reverb chassis that has a 5F6-A sized OT. I'm not sure if the OT is going to bump into the speaker, so I'd like to take a look at a cabinet diagram to see if I need to specify a custom baffle when I order the cabinet from Mojotone. Does anybody have a construction diagram available for this?
-
Don't have diagram but I've squeezed in bigger transformers into DR boxes. If that's a 4 bolt mount OT, best to use a cap can and loose doghouse to mount OT opposite end from PT. Other option would be order a 2x10 baffle board. If tranny is smaller, as in VIbrolux size, it can fit but must be mounted at an angle to clear speaker.
-
Send E mail to Mojotone.
-
Send E mail to Mojotone.
I've inquired with them in the past on a similar topic - chassis diagram - and there policy is that they don't distribute that kind of documentation to customers.
I live in a remote area, otherwise I could run to a local shop that has a Deluxe Reverb and take a measurement.
-
May be as simple as choosing a speaker that will fit. I had to do that with a Deluxe Reverb that I crammed into a 5E3 cab.
-
Send E mail to Mojotone.
I've inquired with them in the past on a similar topic - chassis diagram - and there policy is that they don't distribute that kind of documentation to customers.
I know that, I mean send your chassis measurements and ask if it will fit.
-
I have a Mojotone cabinet here. I will get you some dimensions after lunch.
-
I have a Mojotone cabinet here. I will get you some dimensions after lunch.
Great ! :worthy1:
-
The Deluxe output transformer clears the speaker by 1/2 inch. I believe the 5F6-A transformer is over an inch taller than the Deluxe, so the speaker would have to be moved over towards the Normal Input side.
-
The Deluxe output transformer clears the speaker by 1/2 inch. I believe the 5F6-A transformer is over an inch taller than the Deluxe, so the speaker would have to be moved over towards the Normal Input side.
.
.
Thanks! This is exactly what I was looking for. Problem solved.
.
.
-
I'm building a circuit into a Deluxe Reverb chassis that has a 5F6-A sized OT. I'm not sure if the OT is going to bump into the speaker, so I'd like to take a look at a cabinet diagram to see if I need to specify a custom baffle when I order the cabinet from Mojotone. Does anybody have a construction diagram available for this?
See attached JPG and PDF
-
I'm building a circuit into a Deluxe Reverb chassis that has a 5F6-A sized OT. I'm not sure if the OT is going to bump into the speaker, so I'd like to take a look at a cabinet diagram to see if I need to specify a custom baffle when I order the cabinet from Mojotone. Does anybody have a construction diagram available for this?
See attached JPG and PDF
.
.
That's terrific - thank you!
.
.
-
is the pdf still available? I too am looking for cabinet plans for deluxe reverb after my mojotone amp build
-
is the pdf still available? I too am looking for cabinet plans for deluxe reverb after my mojotone amp build
The link in Reply #10 still works for me