Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: guideb on October 07, 2020, 08:31:24 am

Title: DIYLC no visible text for "abc" tool
Post by: guideb on October 07, 2020, 08:31:24 am

Hi guys,

i found DIYLC and i really love it. Im learning electronic and id like to build eurorack fx and synth module in the future. 

Actually everything goes well on the soft unless the "ABC" tool which is invisible on the screen once i try to text something around the veroboard even though i set on the black color. Same thing for the BOMlist which is not visible. Any fonts i tried in the list does not work. The strange part is it's working well if i use the "CBA" (reversed text)...  :w2:

I guess its something stupid or may be there is something missing in the library.

It was a pain to make DIYLC 4.9.0 work on catalina. i couldn't launch the app so i used a "diylc-4.9.0-setup.jar" then it created a main folder containing "diylc.exe". I removed it and i replaced it with the DIYLC app logo that i couldn't launch previously. it's how i made DIYLC work on catalina.  :dontknow:

From now the only problem i have is about the "abc" text not visible

If you have any clue, thank you so much

Gui

Title: Re: DIYLC no visible text for "abc" tool
Post by: EL34 on October 07, 2020, 09:15:58 am

Works for me as shown in the screen shot below

Maybe some of the Edit Selection settings are wrong for ABC?