Hoffman Amplifiers Tube Amplifier Forum
		Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Leevi on October 19, 2020, 07:13:27 am
		
			
			- 
				Any idea what is causing this noise. The amp is 5E3.
 
 
 https://www101.zippyshare.com/v/YVuV9GuV/file.html (https://www101.zippyshare.com/v/YVuV9GuV/file.html)
 
 
 /Leevi
 
 {EDIT: changed thread title -PRR}
- 
				Any idea what is causing this noise. The amp is 5E3.
 
 
 https://www101.zippyshare.com/v/YVuV9GuV/file.html (https://www101.zippyshare.com/v/YVuV9GuV/file.html)
 
 
 /Leevi
 
 
 Is this a startup on a new build or is this a problem that just showed up in an amp that has been previously without problems?
- 
				It is a 5E3 clone without mods. Unfortunately I cannot do any troubleshooting since the amp is not yet at my place. No problems before and this issue exists after the amp has warmed up.
 
 /Leevi
 
 
- 
				Gee.. sounds like a soundtrack to a horror movie.    :lipsrsealed: 
			
- 
				Yes, one reason might be that 50Hz heater pin is in contact with plate.
 /Leevi
- 
				One power tube was broken.
 /Leevi