Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: HighFlyingV on December 05, 2020, 12:58:06 am

Title: Sol Super Lead 60
Post by: HighFlyingV on December 05, 2020, 12:58:06 am

So , I have a old Marshall JTM 30
and I was searching the web trying figure out if I could build something using the stock transformers with 5881 that would be like a modded JCM 800 , not an exact copy just in that area of high gain.

Has anyone built the soldono lead 60 from the Hoffman schematic list ?

Title: Re: Sol Super Lead 60
Post by: HighFlyingV on December 05, 2020, 08:08:42 am

I am not so much asking to change the schematic . Just wondering if anyone has built a similar soldono or perhaps some other suggestion with the 5881’s clean to mean tones . I know fenders are go to 6L6’s but they are generally known as clean amps .
https://el34world.com/charts/Schematics/files/Soldano/Soldano_super_lead_60.pdf

Title: Re: Sol Super Lead 60
Post by: PRR on December 05, 2020, 04:29:04 pm

V3 A and B are surely drawn wrong there.

Title: Re: Sol Super Lead 60
Post by: pullshocks on December 05, 2020, 08:14:21 pm

All you ever would want to know is at slocloneforums.com


Also, Rob Robinette has a SLO  variant on his web page

Title: Re: Sol Super Lead 60
Post by: HighFlyingV on December 06, 2020, 06:53:40 pm

Quote from: pullshocks on December 05, 2020, 08:14:21 pm

All you ever would want to know is at slocloneforums.com


Also, Rob Robinette has a SLO  variant on his web page

I like Rob’s site , I will check that out . Thanks pullshocks !