Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 18, 2005, 05:35:57 am
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> What damage can occur if...
<< Prev Topic | Next Topic >>
Author Comment
Jukelemon
Junior tube assistant
Posts: 18
(3/24/04 10:34 am)
What damage can occur if...
--------------------------------------------------------------------------------
The speakers are not plugged into the OT at the time of firing the amp up.
Specifics Please.
Thank you.
LooseChange
Senior tube assistant
Posts: 220
(3/24/04 11:45 am)
Re: What damage can occur if...
--------------------------------------------------------------------------------
If you don't produce any signal, not really a problem.
If you send a signal, you are in for some trouble. From experience: I played my guitar at about 50% volume, heard no signal, and kept playing (stupid me!). Well I saw smoke come out of the output transformer. Got lucky, didn't kill the tranny but, could have!
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.