Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Mike_J on February 04, 2021, 03:39:17 pm
-
I have upgraded my turret installation board. Whereas I was using a hammer before to somewhat level the G10 I was using now I have some nice 1/4" carriage bolts to level out my board. Can retire my hammer to other purposes now. Also included is the G10 board I am going to use to do my next 5f6a Bassman build with. Using Sluckey's suggestion of a center punch and it appears to be working out well. Stuck on the PI to power tube conversion right now but I am sure I will get that resolved.