Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => AmpTools/Tech Tips => Topic started by: paintballnsk on February 08, 2021, 01:14:23 am
-
Hi,
I have a little project I'm working on and I need something similar to the testpoints found on some amps that have bias test leads in the back.
Anyone know what that part is called and maybe have a link to some?
Thanks!
-
2mm probe tip jack.
https://hoffmanamps.com/MyStore/perlshop.cgi?ACTION=enter&template&thispage=JacksPlugs&ORDER_ID=!ORDERID!
$1.56 each from hoffman.
invest in a 1/4" lock washer or 1/4" star washer for the nut side.
--pete
-
2mm probe tip jack.
https://hoffmanamps.com/MyStore/perlshop.cgi?ACTION=enter&template&thispage=JacksPlugs&ORDER_ID=!ORDERID!
$1.56 each from hoffman.
invest in a 1/4" lock washer or 1/4" star washer for the nut side.
--pete
Yes, that is what I use too.
You need 1 ohm resistor.
-
2mm probe tip jack.
https://hoffmanamps.com/MyStore/perlshop.cgi?ACTION=enter&template&thispage=JacksPlugs&ORDER_ID=!ORDERID (https://hoffmanamps.com/MyStore/perlshop.cgi?ACTION=enter&template&thispage=JacksPlugs&ORDER_ID=!ORDERID)!
$1.56 each from hoffman.
invest in a 1/4" lock washer or 1/4" star washer for the nut side.
--pete
Fixing the link so it does not point to your shopping cart
jacks- Plugs page
https://hoffmanamps.com/MyStore/catalog/JacksPlugs.htm