Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: pbman1953 on February 18, 2021, 10:23:01 am
-
Recently, in my Sunn 2000s, I installed a 80Mf cap on the C line from the filter section. Now I notice that my Bass Control does nothing. Are they related?
https://el34world.com/charts/Schematics/files/Sunn/Sunn_2000s.pdf
-
Curious as to why such a large cap in the C node . . .
Looking at the schematic, the two should not be related.
-
No. But you may have accidentally boogered something while installing that 80µF cap.
-
The connections seem ok. Would anything else not work right? Besides the bass all works fine
-
I'm with Sluckey, "the last thing you did", 9outa10 in my career
other less possible;
did you mess with bass that much before cap swap? You might be noticing because with the new cap you're playing with knobs that haven't been tested in awhile
-
Before this , it was hit or miss with the bass control. It doesn't do much but it's nice to have if the bass boost is too strong.
-
I got it back. I found a ground and a couple connections that were questionable.
Thanks for the quick reply's!!