Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: burt_toast on April 01, 2021, 06:26:32 am

Title: 1st stage grid stopper question
Post by: burt_toast on April 01, 2021, 06:26:32 am

In my latest build, I used a more-or-less straight up plexi V1, but instead of 2 or 4 input jacks (externally jumped), I used only one. I've got a single 33k going from input to BOTH pin 2 and 7.


Should I be jumping pins 2 and 7 with another 33k? One 68k for both? Fine as it is?

Title: Re: 1st stage grid stopper question
Post by: sluckey on April 01, 2021, 07:06:53 am

I used two 68Ks. You are fine as is.

Title: Re: 1st stage grid stopper question
Post by: burt_toast on April 01, 2021, 07:41:25 am

Cool, thanks Sluckey :)