Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: daveneary on April 27, 2021, 06:25:33 pm

Title: Single channel DR with no reverb
Post by: daveneary on April 27, 2021, 06:25:33 pm

Anyone tried this. I have a Princeton bf reverb chassis and a front panel with Vol treb bass speed intensity

Title: Re: Single channel DR with no reverb
Post by: tubenit on April 27, 2021, 07:50:42 pm

Are you asking about a one channel DR with tremolo but no reverb?   :dontknow:   OR are you simply stating that's what the control panel on front lists?   


Can you offer some clarity?   How many preamp tubes are you thinking of using?


With respect, Tubenit

Title: Re: Single channel DR with no reverb
Post by: sluckey on April 27, 2021, 08:20:54 pm

Here you go. Just cut out the normal channel.

     https://el34world.com/charts/Schematics/files/Fender/Fender_deluxe_ab763_schem.pdf

I wonder if the PT will fit the PR cutout?

Title: Re: Single channel DR with no reverb
Post by: DummyLoad on April 27, 2021, 09:17:31 pm

a single channel deluxe reverb without reverb is simply a single channel deluxe.


--cap'n obvious 


 :icon_biggrin:

Title: Re: Single channel DR with no reverb
Post by: EL34 on April 28, 2021, 06:52:15 am

Quote from: DummyLoad on April 27, 2021, 09:17:31 pm

a single channel deluxe reverb without reverb is simply a single channel deluxe.
--cap'n obvious 
 :icon_biggrin:

Or any of the AB763 No reverb amps on this page?
 
https://hoffmanamps.com/MyStore/catalog/EyeletBoard.htm (https://hoffmanamps.com/MyStore/catalog/EyeletBoard.htm)