Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: joesatch on September 18, 2021, 07:49:57 am

Title: Cap can in chassis.
Post by: joesatch on September 18, 2021, 07:49:57 am

Running out of room it looks like i will need to install the cap can in the chassis sideways. Any issues i should be aware of? Will having it near 'X" cause a problem? I intend to mount this cap can underneath oriented how i show it here. Any issues?  The mains will be coming in under the choke in the lower left. The OT will be above a significant portion of the board.  Will any noise issues occur from this layout?
(https://i.ibb.co/YN2srHP/20210918-084255.jpg)
(https://i.ibb.co/XtXR83f/20210918-084328.jpg)

Title: Re: Cap can in chassis.
Post by: sluckey on September 18, 2021, 08:01:20 am

Take a look...

     https://el34world.com/projects/Plexi6V6.htm

Title: Re: Cap can in chassis.
Post by: dragonworks on September 18, 2021, 08:06:44 am

Nice work on that amp. Too bad they all weren't that neat.