Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: 1blueheron on November 19, 2021, 01:04:02 pm
-
Does this look correct as a Type 3 MV for this amp.
-
yes
-
Have you been reading this thread? It talks about that Type 3 MV. Most guys do not like it.
https://el34world.com/Forum/index.php?topic=28190.msg310566#msg310566
Lar-Mar MV is the most liked.
-
Have you been reading this thread? It talks about that Type 3 MV. Most guys do not like it.
https://el34world.com/Forum/index.php?topic=28190.msg310566#msg310566
Lar-Mar MV is the most liked.
I will give it a read. Thanks for pointing me to it.
-
Have you been reading this thread? It talks about that Type 3 MV. Most guys do not like it.
https://el34world.com/Forum/index.php?topic=28190.msg310566#msg310566
Lar-Mar MV is the most liked.
I will give it a read. Thanks for pointing me to it.
Stop wasting your time on that type 3 MV. Add a LarMar and call it a day. You won't look back. It's the best PPIMV design out there...
AND.. since your amp is cathode biased, did you ever consider a VVR ? It's pretty easy to install on a Cathode biased amp. BTW, you switched the naming on the cathode resistor and cap.
-
I can also add that I’ve found that type of ”cross-line” master almost useless. At least if you intend to reduce volume by more than a few decibels.
-
you switched the naming on the cathode resistor and cap.
Fixed it.