Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: turbofeedus on January 10, 2022, 10:20:47 am
-
Need to replace the vertical mount L brackets for a salvaged OT.
These aren't just bent up, the metal has separated at the bend.
(https://imgur.com/mTmYJh7.jpg)
I thought this would be a more commonly available item, maybe I'm just missing them?
Worst case I will just get some sheet metal and whip out the jig saw, but I thought I would see if someone has a source.
-
These work very well...
https://www.lowes.com/pd/ReliaBilt-ReliaBilt-3-4-in-Zinc-Plated-Corner-Brace-4-Pack/5003427659
-
Oh! Interesting, thanks sluckey :laugh:
-
What Steve said and also, Lowes has angle iron and angle Aluminum
-
Weber sells bell ends and standup brackets like your picture, their made for one of his PT’s but may or may not be the right size.
$10.30 for two bell covers and the stand-up brackets.
Under amp parts; then transformers; at Weber amp kits. Worth a shot, they have specs listed.
-
What Steve said and also, Lowes has angle iron and angle Aluminum
Weber sells bell ends and standup brackets like your picture, their made for one of his PT’s but may or may not be the right size.
$10.30 for two bell covers and the stand-up brackets.
Under amp parts; then transformers; at Weber amp kits. Worth a shot, they have specs listed.
I checked out the weber parts, those aren't going to fit my transformer unfortunately. I think the angle pieces sluckey recommended are the way to go. Thanks!