Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: jackplug1 on January 28, 2022, 12:10:34 pm

Title: Filament transformer advice needed
Post by: jackplug1 on January 28, 2022, 12:10:34 pm

I have an HT transformer without heater windings

Is there any reason not to use this as a filament transformer for a 2x 12ax7 + 6v6 amplifier - its not 6.3v but 6v

12 VTX-126-012-206 230 2 x 6

https://www.switchelectronics.co.uk/pub/media/pdf/VTX126.pdf (https://www.switchelectronics.co.uk/pub/media/pdf/VTX126.pdf)

Title: Re: Filament transformer advice needed
Post by: EL34 on January 28, 2022, 12:32:05 pm

Posted in wrong board... moving

Title: Re: Filament transformer advice needed
Post by: sluckey on January 28, 2022, 12:48:04 pm

no

Title: Re: Filament transformer advice needed
Post by: jackplug1 on January 28, 2022, 02:42:52 pm

Thank you