Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: joesatch on February 01, 2022, 09:19:25 am
-
Is there a premade one out there or should i buy a blank chassis? Will be using 6L6's 40 watts
-
Blank chassis are a PITA.
I like using Blackface Princeton chassis for this, but I also don't use Dougs board.
Check out sluckeys TDR if you haven't already for a nice small circuit that you won't regret building.
-
Blank chassis are a PITA.
I like using Blackface Princeton chassis for this, but I also don't use Dougs board.
Check out sluckeys TDR if you haven't already for a nice small circuit that you won't regret building.
Is there enough room for the 6l6 and larger iron? Doghouse on top? i want the tremolo circuit though
-
Blank chassis are a PITA.
I like using Blackface Princeton chassis for this, but I also don't use Dougs board.
Check out sluckeys TDR if you haven't already for a nice small circuit that you won't regret building.
Is there enough room for the 6l6 and larger iron? Doghouse on top? i want the tremolo circuit though
Yes for the 6L6s and iron. Not really for the doghouse. But on these I just use the 40/20/20/20 can cap because the hole is already there.
I should've mentioned that. So, it's not sluckeys design exactly, but his board is perfect.
With the trem you'd be squeezing it in. I would do it, but I wouldn't suggest it.
-
Blank chassis are a PITA.
One man's pain is another man's creative energy . . . :icon_biggrin:
-
I dont mind using a blank chassis but drilling them out makes a massive mess of little metal shavings everywhere. Took me weeks to rid my garage of them