Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Cabinets-Speakers => Topic started by: pbman1953 on March 14, 2022, 12:46:24 pm

Title: Does anyone have a speaker design program? EV 15L in a 3.2 CF box
Post by: pbman1953 on March 14, 2022, 12:46:24 pm

I have an EV 15L 15" woofer that I want to use in a Fender Rumble box that has 2 - 3" ports.


If you do have the software hopefully you have the specs for the 15L. Otherwise, please look here-


https://www.manualslib.com/manual/169588/Electro-Voice-Pro-Line-Evm-15l.html






Interior-


20" L
22" W
12.25" D


5390 cubic inches- 3.119 CF


There are 2- 3" x 21/4" ports on the front


can anyone spec this out and let m know where I am?

Title: Re: Does anyone have a speaker design program? EV 15L in a 3.2 CF box
Post by: shooter on March 14, 2022, 02:57:39 pm

Speaker Design : Comprehensive list of Recommended Design Tools | diyAudio (https://www.diyaudio.com/community/threads/speaker-design-comprehensive-list-of-recommended-design-tools.324068/)

Title: Re: Does anyone have a speaker design program? EV 15L in a 3.2 CF box
Post by: pbman1953 on March 14, 2022, 02:59:21 pm

Thanks!

Title: Re: Does anyone have a speaker design program? EV 15L in a 3.2 CF box
Post by: jojokeo on March 22, 2022, 06:37:39 pm

A couple years ago I got on a 15" binge and went through several cabs and speakers. Not all were my choice as one cab arrived damaged, etc. but it had a Warehouse 15 in it and it sounded great! I went through a few others in an unfinished cab and ended up with the EV15L. I figure it can handle maybe even a 100w Marshall and use it for a test speaker too? A little later I was able to find a Celestion 15 but have been interrupted in carrying further experiments forward. And then life happens...