Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: joesatch on March 22, 2022, 08:45:54 pm

Title: Anyone ever incorporate an accutronics brick into their builds?
Post by: joesatch on March 22, 2022, 08:45:54 pm

Thinking wiring one of these into a build with a reverb knob (maybe two to add decay and level). Would it go out into the phase inverter?

(https://i.ibb.co/TYLhQKY/p-rbtdr-2h-s.webp)

Title: Re: Anyone ever incorporate an accutronics brick into their builds?
Post by: tubeswell on March 22, 2022, 09:07:12 pm

IIRC, TIMBO did this maybe in one of his builds a few years back. But my mind might be playing tricks with me.

Title: Re: Anyone ever incorporate an accutronics brick into their builds?
Post by: uki on March 22, 2022, 10:23:54 pm

You'll like this !!

Title: Re: Anyone ever incorporate an accutronics brick into their builds?
Post by: joesatch on March 22, 2022, 11:01:30 pm

Fabulous my man!  I knew i came to the right place  :l2:

Title: Re: Anyone ever incorporate an accutronics brick into their builds?
Post by: TIMBO on March 23, 2022, 04:30:08 am

Hey mate,
It all started here...
Belton Reverb Brick (el34world.com) (https://el34world.com/Forum/index.php?topic=23554.0)


A build using one. Works great.

6GW8 Parallel SE (el34world.com) (https://el34world.com/Forum/index.php?topic=23546.0)

Title: Re: Anyone ever incorporate an accutronics brick into their builds?
Post by: shooter on March 23, 2022, 06:46:12 am

I added a brick reverb to a build, worked great, directions were correct, although there were a couple, "thought provoking" moments  :laugh: