Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: joesatch on June 09, 2022, 10:13:00 pm
-
This toroidial PT is outputting 210vac into the FWB and i'm measuring 210VDC on the rectifier out tap. I've never seen this. The voltage rectified is the same. What's wrong here? Shouldn't it be much higher? I have the reservoir cap disconnected.
-
You have the reservoir cap disconnected.
Try connecting it.
-
i think because the cap is disconnected, the peak voltage isn't being sustained. I' guessing this is the issue
-
Try connecting it.
-
ok i formed the cap. it's reading 286vdc. All good. I knew i forgot something. Thanks!