Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: goldstache on August 31, 2022, 08:19:46 pm

Title: Joeamazoo pentode front end
Post by: goldstache on August 31, 2022, 08:19:46 pm

Kalamazoo model 2 is one of my faves.


So here’s my riff on it with effects.


Tubes:
6sj7
12dw7
12ax7
6BQ5 SE
SS or 5ar4


I played with choke input, and likely will go that route, but here is what’s on the breadboard. Currently using 5k primary and 8ohm secondary on reverb transformer.
Any thoughts welcome, thanks!

Title: Re: Joeamazoo pentode front end
Post by: PRR on August 31, 2022, 09:43:59 pm

POT5 is "reverb" 500k?

Title: Re: Joeamazoo pentode front end
Post by: goldstache on September 01, 2022, 12:38:04 am

Good eyes.
5k pot for trem intensity actually.


Thanks PRR!