Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Voxbox on September 15, 2022, 08:32:31 am
-
Hello,
I'm building my first two orders for a 5E3 Deluxe (Woohoo!)
To get the vibe right, I'd like to place a tube chart in the back of the cabs and I reckoned that someone, somewhere may have a template for this?
Any help really appreciated :smiley:
Cheers, VB.
-
I've never tried this one but it might work.
-
Here's one I put in my 5E3. The original is in Visio format.
http://sluckeyamps.com/5e3/5e3.pdf
-
I've seem fake Fender labels on eBay in the past but might have been banned now...?
-
Here's one I put in my 5E3. The original is in Visio format.
http://sluckeyamps.com/5e3/5e3.pdf (http://sluckeyamps.com/5e3/5e3.pdf)
What does that Paul C mod do?
-
Converts the PI to fixed bias. Most commonly used on a Princeton reverb.
https://robrobinette.com/AA1164_Princeton_Reverb.htm#Paul_C_Mod
https://robrobinette.com/images/Guitar/AA1164/Paul_C_Mod_Schematic.pdf
-
Thanks AC4527V and Sluckey. They're grand.
Sluckey, I really like your tube diagrams, would you mind posting the original Visio?
Thanks in anticipation,
Cheers, VB
-
Here you go...
-
Many thanks Sluckey, thats really kind of you. :grin: